AU taura taura
Whakaahuatanga
Ko te nuinga o te waa e whakamahia ana mo te hononga mutunga o te taura me te haere tonu, kia kaha ake, kia haumaru ake te taura me te hononga hiko.
| Ingoa waitohu | EP |
| ingoa hua | Tauera Taura |
| Tau tauira | AU |
| Rauemi | Al-99.5% |
| Kohao | Kohao kotahi |
| Taupānga | Honoa te kaikawe |
| Te maimoatanga | Whakakikoruatia tine |
| Paerewa | IEC 61238-1 |
Ko te taura taura e hangaia ana e te hangarau weriweri waku, me te kaha pai o te weld, te pai o te mahi hiko, te aukati waikura hiko, te roa o te mahi me etahi atu.
Whakatakotoranga
Rauemi: A1-99.5%
maimoatanga mata: paku-whakakikoruatia tine 15 microns
Taonga Hua: He rite ki te Din 46329 me nga tohu mo te crimping tika.Na ka whakakiia te kapi o tana oko ki te whakakotahitanga ki te waikura waikawa.Ko tana momo whakamatautau ka whai i te IEC 61238-1.
| Tau tauira | Tauira taura(mm²) | Ahu(mm) | Te rahi o te tiihi | ||
| D | d | L | |||
| AU16-8 | 16 | 60 | 5.8 | 20 | M8 |
| AU16-10 | 60 | 5.8 | 20 | M10 | |
| AU25-8 | 25 | 62.5 | 6.8 | 25 | M8 |
| AU25-10 | 62.5 | 6.8 | 25 | M10 | |
| AU35-8 | 35 | 74.5 | 8 | 25 | M8 |
| AU35-10 | 74.5 | 8 | 25 | M10 | |
| AU50-10 | 50 | 74.5 | 9.8 | 25 | M10 |
| AU50-12 | 74.5 | 9.8 | 25 | M12 | |
| AU70-10 | 70 | 84.5 | 11.2 | 25 | M10 |
| AU70-12 | 84.5 | 11.2 | 25 | M12 | |
| AU95-10 | 95 | 84.5 | 13.2 | 25 | M10 |
| AU95-12 | 84.5 | 13.2 | 25 | M12 | |
| AU120-10 | 120 | 97 | 14.7 | 30 | M10 |
| AU120-12 | 97 | 14.7 | 30 | M12 | |
| AU150-10 | 150 | 105 | 16.3 | 30 | M10 |
| AU150-12 | 105 | 16.3 | 30 | M12 | |
| AU185-12 | 185 | 106 | 18.3 | 30 | M12 |
| AU185-16 | 106 | 18.3 | 30 | M16 | |
| AU240-12 | 240 | 122 | 21 | 38 | M12 |
| AU240-16 | 122 | 21 | 38 | M16 | |
| AU300-12 | 300 | 122 | 23.3 | 38 | M12 |
| AU300-16 | 122 | 23.3 | 38 | M16 | |
